When to remove self-leveling spacer?

Automatic translation

The spacers are none other than the small PVC pieces used when laying tiles in order to always respect the same spacing between the tiles and in order to be able to make regular joints. They currently exist in different formats, thicknesses and colours. But the most popular models are the so-called "self-leveling" braces.

Self-leveling spacers, two in one accessory

Self-leveling spacers can be considered as 2in1 accessories. Not only do they make it possible to properly space the tiles of the width of the desired joint, but they guarantee that they are laid at the same level. When gluing, simply place them under the tiles, especially at each corner of the tile and on the periphery. Then, you have to place a clamping piece on each of them, and you have to use it at will to allow the natural sinking of the tile into the glue.
What is advantageous about the clamping parts is the fact that they are ultra practical. They are easily removed with a kick or a mallet. Then, they can be recovered by simple scanning to be reused.

Steps to take to properly lay tiling

After spreading the glue and placing the first tile, place a cross or T-shaped brace in the corner of the tile. Then, the next tile must be placed next to the first so that the angle is taken by the crosspiece. The next step is to position the tiles around the spacer installed earlier. Then, repeat the same operation at all angles. Once the self-leveling spacers are surrounded by the tiles, the dial must be installed. The latter is to be screwed and tightened gradually to obtain a perfect leveling.
Self-leveling spacers should only be removed after 24 or 48 hours. In fact, you have to wait for the glue to dry before unscrewing the dials. That way, only the rod of the brace will remain.
In addition, it should be noted that a simple kick can break the part of the self-leveling cross that protrudes from the ground. And you have to clean the floor before starting the joints in order to remove the threaded elements that are scattered everywhere.
By following these steps, it is possible to benefit from tiling laid in the rules of the art. Yes, self-leveling spacers guarantee precise, level, harmonious and regular laying of tiles.