How to lay tiles on a staircase?

Laying tiles on a staircase is a bit more complex than laying tiles on the floor or on the wall. You have to follow a few basic rules, you have to use suitable materials and you have to go step by step. If you want to do this kind of work yourself, learn the main steps to take and some pro tips in this guide.

Choosing durable and designer tiles

First, you need to start by choosing the tiles to install on your staircase. Take into account their strength and design, because as you know, the staircase is a very busy place of passage. Always consider its UPEC rating, as it should be like U2S * P2 E1 C0.

Calculate the number of tiles to lay

After choosing the type of tiles to lay on your staircase, calculate the number of tiles required. This step is called "the layout" and it is essential to plan and to facilitate the installation. To make it, you require to carefully measure the area of ​​the steps and the area of ​​the risers. Then, you require dividing the total area to be tiled by the area of ​​a tile.

Sketching the Staircase to Tile

The next step is to sketch the staircase to be tiled on a sheet of chequered paper. Here you require drawing a flat view of your staircase. Then, you must transfer the position of the steps and risers on your drawing.

Choosing a starting point for laying your tiling

To continue, you must choose a starting point for laying your tiling. It is best to start at the top of the stairs if the exit is at the bottom or vice versa, if you do not want to have a problem accessing your parts while the adhesive is drying.

Determine the order of laying the tiles

In addition, you must also determine the order of laying the tiles. Normally, this type of operation is carried out in three stages, including: laying whole stair nosing tiles and cut tiles at the edges, laying whole tiles on the steps and on the sides of the steps and laying whole tiles on the risers.

Cutting the tiles

Before you get started with the actual tiling, you should cut your tiles using a tile cutter and a file. For a satisfactory result, these cuts must be made on the re-entrant angles, that is to say towards the inside of the steps.

Lay the tiling so as not to block the staircase

Once the cutouts are completed, all you have to do is glue and lay your tiling. Tile every other step to allow use and not to block your staircase during installation. Then, avoid walking on the freshly tiled steps so as not to spoil everything.