How to change a tap ?

Your tap shows signs of weakness? Discover a simple and accessible way to disassemble your faucet with Action DIY. Whether to replace a faulty faucet, change faucet model or replace a worn seal.

Steps to change your tap :

Valves are an important element in water features. It allows comfort and running water at will. The slightest failure can become problematic because it upsets your daily habits. It may be a leaky or broken tap. These signs indicate that you must replace it without delay before aggravating the problem and increasing your water consumption. The most important thing is to buy quality and durable accessories. You must ensure that the tap is changed correctly with the correct plumbing tools. In this case, it is imperative to respect all stages of this procedure.

The choice of replacement taps

When your tap fails, you must replace it with a more powerful and robust model. You have a wide choice of all types of taps available on the market. Depending on your expectations and needs, there are mixer taps, mixers, waterfall mixers and thermostats. Some of them offer the advantage of significant savings on your water consumption. When buying this accessory, you must take into account its use as well as many other criteria. These include the method of attachment that can be pillar tap attachment or monobloc. You should take into account the design and dimensions of the tap so that they are in harmony with your interior decoration.

Steps for changing taps

Replacing kitchen or bathroom taps is done in several stages. You need plumbing equipment to perform this procedure correctly ad aesthetically. Start by cutting off the water supply. Then purge the pipes by opening all the taps to evacuate the remaining water that has accumulated there. You can finally dismantle the current faulty installation using two adjustable wrenches. This type of plumbing tool allows you to remove piping suitable for the old attachment. You must then unscrew the stem of the drain which is under the sink. This operation often requires the use of a Phillips- head screwdriver. You can then remove the old tap by unscrewing with a pipe wrench the lock nuts that hold it to the sink. This phase is the last step before installing the new taps. . First, you need to attach the pipe to the water inlet pipe, making sure the seals are compatible and making sure you do not confuse the hot and cold water supply. Then place the threaded rods for fixing the valve. You can now mount the new tap not forgetting to properly position the seal between this accessory and the stabilizer plate. Screw in the double locknut and the water fittings. Finally, adjust the bung stem before opening the water supply to test the operation of the new equipment.